Restore Chatter's firmware

If you want to return Chatter to its original state, you can use the restore firmware option.

In MicroPython, you don't have to do this after running every new code.

To restore Chatter's firmware, follow these steps:

1. Navigate to the main CircuitBlocks page and look for the Restore firmware button in the upper right corner of the screen.
random image

2. Click on it and choose the red Restore firmware button.

random image

3. The process will begin and last for a few seconds.

When it is finished, your device will restart and you will have to repeat the hardware test.

That's all!

Your Chatter has been restored to its original state, and you can use it once more.